GDH-B1

GDH-B1 is a bio-based melt blended resin. It is compostable in accordance with DIN EN 13432, ISO 14855 and in the US ASTM D6400 standards.

Download PDF file

Applications

This material is suitable for injection molding, profile extrusion and blown film extrusion.

Processing Recommendations

Extruder Zone Temperature F

Rear 300-329 F

Center 300-329 F

Front 300-329 F

Nozzle 300-329 F

Processing at temperatures above 350 F may result in combination of high shear condition such as high injection speed may result in thermal degradation of this resin.

GDH-B1 should be dried prior to processing

Drying Conditions:

Out of a sealed box: 90 to 100 F for 2-3 hours

Open box: 100 to 120 F for 4-5 hours

Specific recommendations for processing GDH-B1 can be made based on customer equipment and processes. For further suggestions, please contact Green Dot Holdings.

technical_sheet

NOTE: While this information is presented in good faith and believed to be accurate, Green Dot Holdings, LLC does not guarantee satisfactory results from reliance upon such information and disclaims all liability for any loss or damage arising out of its use. The above information gives typical properties only. Product specifications may be obtained upon request. Final determination of the suitability of any information or material for the use contemplated, the manner of use, and whether there is any infringement of patents is the sole responsibility of the user.